JRD - Available in 1/2, 3/4 & 1 HP (60Hz)

Model: JRD5, JRD7 & JRD10

This convertible jet pump is great for use in homes or cottages, on farms, and where booster service is required. Convertible jet pumps in this group feature pipe connections of 1î NPT discharge, 1ºî NPT suction, 1î NPT pressure and a pressure switch of AS4 that is preset at 30-50 PSI. This 60 Hz, single phase product includes standard NEMA service factors and operates at 3500 RPM. Also featuring a built-in overload, an automatic reset and a stainless steel shaft. Maximum temperature is 140∞F.

 

JRS ñ Available in Ω, æ & 1 HP (60 Hz)

Model:  JRS, JRS5, JRS5H, JRS7 & JRS 10

This shallow well jet pump is great for use in homes, cottages and where booster service is required.  The shallow well jet pumps in this group feature pipe connections of 1ºî suction and 1î discharge.  The pressure switch is the AS4 preset (30 ñ 50 PSI).   This 60 Hz, single phase product includes standard NEMA service factors  and operates at 3500 RPM with a Ω - 1 HP, 115/230 V capacitor start. The unit features a built-in overload with automatic reset and stainless steel shaft.  Maximum temperature is 140∞F.

 

J+ - Available in  Ω, æ, 1 & 1Ω HP (60 Hz)

Model: J5, J7, J10 and J15

This convertible jet pump is great for use in homes, farms, cottages and where booster service is required.  The convertible jet pumps in this group feature pipe connections of 1ºì NPT suction, 1î NPT discharge 1î NPT drive (pressure) with an AS4 pressure switch that is preset at 30 ñ 50 PSI.  This 60 Hz, single phase product includes standard NEMA service factors and operates at 3500 RPM. It has a Ω - 1 Ω HP, 115/230 capacitor start. Also featuring a built-in overload, an automatic reset and a stainless steel shaft. Maximum temperature is 140∞F.

 

JS+ - Available in  Ω, æ, 1 & 1Ω HP (60Hz)

Model: J5S, J5SH & J10S, J15S

This shallow well jet pump is great for use in homes or cottages, and where booster service is required. The shallow well jet pumps in this group feature pipe connections of 1î NPT discharge, 1ºî NPT suction, with a pressure switch of AS4 that is preset at 30-50 PSI. This 60Hz, single phase product includes standard NEMA service factors and operates at 3500 RPM.  It has a Ω - 1 Ω HP, 115/230 capacitor start.  Also featuring a built-in overload, an automatic reset and a stainless steel shaft. Maximum temperature is 140∞F.

 

HSJ ñ Available in æ, 1, 1Ω , &  2 HP (60Hz)

Model: HSJ

This multi-stage convertible jet pump is great for use in homes or cottages, on farms, and where booster service is required. The multi-stage convertible jet pumps in this group feature pipe connections of 1î NPT discharge, 1ºî NPT suction, 1î NPT pressure and a æ - 1 Ω HP AS4 and a 2 HP AS10 pressure switches that are both preset at 30-50 PSI. This 60Hz, single phase product includes standard NEMA service factors and operates at 3500 RPM. Also featuring a built-in overload, an automatic reset and a stainless steel shaft. Maximum temperature is 140∞F.

 

SJ ñ Available in æ, 1, 1Ω , & 2 HP (60Hz)

Model:  SJ07, SJ10, SJ15, SJ20

This deep well vertical jet pump is great for use in homes, cottages, and on farms.  The deep well vertical jet pumps in this group feature pipe connections of 1î NPT discharge, 1ºî NPT suction, 1î NPT drive pressure and a æ - 1 Ω HP AS4 and a 2 HP 230 V only AS10 60 HZ pressure switches that are both preset at 30-50 PSI. This 6 Hz, single phase product includes standard NEMA service factors and operates at 3500 RPM. Also featuring a built-in overload, an automatic reset and a stainless steel shaft. Maximum temperature is 140∞F.

 

VJ ñ Available in Ω  , æ & 1 HP (60Hz)

Model:  VJ05, VJ07, VJ10

This deep well vertical jet pump is great for use in homes farms and cottages.   The deep well vertical jet pumps in this group feature pipe connections of 1î NPT discharge, 1ºî NPT suction, with a pressure switch of AS4 that is preset at 30-50 PSI. The single phase product includes standard NEMA open drip proof service factors and operates 60Hz at 3500 RPM.  Single phase: æ - 1 Ω HP (115/230V); 2 and 3 HP, 230 V only with built in overload with automatic resent.  On the  three phase unit (230/460 V) overload protection must be provided in starter unit.  Starter and heaters (3) must be ordered separately.  Maximum temperature is 140∞F.

 

GT

Model GT

This self priming centrifugal pump is primarily used for lawn sprinkling, irrigation, air conditioning systems, heat pumps water transfer and dewatering.  The self priming centrifugal pumps in this group feature pipe connections are 1 Ωî NPT suction and 1 Ω ì NPT discharge, with capacities to 110 GPM at 5 foot suction lift.  The pump has heads to 128 feet, reprime capabilities: to 25 feet suction lift, maximum working pressure: 125 PSIG, maximum water temperature: 140∞F (60∞C).  The motor is NEMA standard open drip proof, 60 Hz, 3500 RPM, Stainless steel shaft, Single phase: æñ1Ω HP, 115/230 V; 2 and 3 HP, 230 V only (Built-in overload with automatic reset); three phase: 230/460 V. (Overload protection must be provided in starter unit. Starter and heaters (3) must be ordered separately.)  Optional TEFC motors are available

 

GS 33 to 80 Range ñ Available in 10HP (60Hz)

Model:  33GS, 40GS, 55GS, 60GS, 75GS & 80GS

This 10 HP, 60 Hz submersible pump is designed for residential and small municipal water supply as well as light irrigation. The features of these submersible pumps are as follows:

 

ï Powered for Continuous Operation: All ratings are within the working limits of the motor as recommended by the motor manufacturer. Pump can be operated continuously without damage to the motor.

ï Field Serviceable: Units have left hand threads and are field serviceable with common tools and readily available repair parts.

ï Sand Handling Design: Our face clearance, floating impeller stack has proven itself for over 40 years as a superior sand handling, durable pump design.

ï FDA Compliant Non-Metallic Parts: Impellers, diffusers and bearing spiders are construct¨ed of glass filled engineered composites. They are corrosion resistant and non-toxic.

ï Discharge Head/Check Valve: Cast 303 stainless steel for strength and durability. Two cast-in safety line loops for installer convenience. The built-in check valve is constructed of stainless steel and FDA compliant BUNA rubber for abrasion resistance and quiet opera¨tion.

ï Motor Adapter: Cast 303 stainless steel for rigid, accurate alignment of pump and motor. Easy access to motor mounting nuts using standard open end wrench.

ï Stainless Steel Casing: Polished stainless steel is strong and corrosion resistant.

ï Hex Shaft Design: Six sided shafts for positive impeller drive.

ï Engineered Polymer Bearings: The proprietary, engineered polymer bearing material is strong and resistant to abrasion and wear. The upper bearing is mounted in a durable engineered composite bearing spider for excellent abrasion resistance.

 

GS 5 to 25 Range ñ Available in 5 HP  (60Hz)

Model:  5GS, 7GS, 10GS, 13GS, 18GS & 25GS

This 5 HP, 60Hz submersible pump is primarily used for private 4î water wells, general water supply for homes, farms, irrigation and some light commercial.  The features of these submersible pumps are as follows:

ï Field Servicable

ï Sand Resistant Construction

ï Stainless Steel Metal Parts

ï FDA Compliant Non-Metallic Parts

GS Xtreme 5 ñ 75 ñ Available up to 10 HP (60Hz)

Models ñ 5GS, 7GS, 10GS, 18GS, 25GS, 33GS, 40GS, 55GS, 75GS

This 4î submersible pump is used for harsh conditions of coal bed methane extraction.  The features of these submersible pumps are as follows: 

ï Field Proven Design: The GS Xtreme features super strong construction due to the welded casing joints at both ends. The proprietary engineered polymer bear¨ings have been field proven with great success in some of the toughest submersible pump applications on the planet ñ coalbed methane extraction. They are the deepest set pumps we build, available up to 10 HP in many models. Capable of pumping over 1600' TDH.

ï Powered for Continuous Operation: All ratings are within the working limits of the motor as recommended by the motor manufacturer. Pump can be operated continuously without damage to the motor.

ï Sand Handling Design: Our face clearance, floating impeller stack has proven itself for over 40 years as a superior sand handling, durable pump design.

ï Stainless Steel Metal Parts: AISI types 302, 303 and 304 are corrosion resistant, non-toxic and non-leaching.

ï FDA Compliant Non-Metallic Parts: Impellers, diffus¨ers and bearing spiders are constructed of glass filled engineered composites. They are corrosion resistant and non-toxic.

ï Discharge Head: Cast stainless steel discharge head features built-in safety loops and an upthrust limiting stud which is factory set to prevent the rotating assem¨bly from upthrusting. These pumps require a separate field installed external check valve to prevent backflow.

ï Bowls: Stainless steel for strength and abrasive resis¨tance.

ï Check Valve: Not supplied, order separately, pumps have 2" NPT discharge threads.

ï Stainless Steel Casing: Polished stainless steel is strong, attractive and corrosion resistant.

ï Hex Shaft Design: Six sided shafts for positive impeller drive.

ï Shaft Coupling: Exposed for ease of field alignment to motor shaft and to check pump rotation.

ï Bearings: Proprietary engineered polymer bearing material is a super strong, abrasion and heat resistant design.

 

LSP03 / LSP07 ñ Available in 1/3 (LSP03) & æ  (LSP07) (60Hz)

Model:  LSP03, LSP07

This submersible sump pump is primarily used for basement draining, water transfer and dewatering.  The submersible sump pumps in this group feature discharge size: 1 1/2" NPT, capacities: to 57 GPM, maximum head: 34 feet TDH, maximum solids: 3/8" spherical, temperature: 104∫ F (40∫ C) maximum liquid temperature and maximum pump submergence is 10 ft. for LSP03; 16 ft. for LSP07.  The motor features are as follows:  single phase, 3450 RPM, 60 Hz; LSP03, 1/3 HP, 115 V, 2.9 maximum amps; LSP07, æ HP, 115 V (7.1 amps) or 230 V (3.5 amps); built-in thermal overload protection with automatic reset; permanent-split-capacitor type; Class B insulation; stainless steel shaft; air filled design; and power cord length: LSP03; 10 feet standard, 20 feet optional, LSP07; 20 feet.

 

HSC ñ Available in 3/4 ñ 1 1/2 HP, 115/230 V; 2 and 3 HP, 230 V, 60 Hz

Models:  Single phase; HSC07, HSC10, HSC15, HSC20, HSC30

            Three phase; HSC07B, HSC10B, HSC15B, HSC20B, HSC30B

This horizontal multi-stage centrifugal pump is primarily used for general purpose pumps, water circulation, booster service, liquid transfer, spraying systems and jockey pump service.  The horizontal multi-stage centrifugal pumps in this group feature pipe connections 1 ºî suction and 1î discharge, pressures to 100 PSI (230 feet), capacities to 50 GPM, and a maximum working pressure of 125 PSI.   The motors feature are:  NEMA standard,3/4 ñ 11/2 HP, 115/230 V; 2 and 3 HP, 230 V, 60 Hz; Single phase ODP (standard); three phase available; 3500 RPM, ODP motors standard; Built-in overload with automatic reset ; Capacitor type and Stainless steel shaft.  TEFC and explosion-proof motors are available. Maximum temperature is 180∞F (82∞C).

 

GB ñ Available in 1/3 ñ 3 HP  (60Hz available in 50 Hz)

Models:  5GB, 7GB, 10GB, 18GB, 25GB, 33GB

This commercial, high pressure, multi-stage booster pump is primarily used for homes, farms, service stations, fast food restaurants, kennels, marinas also excellent for booster service.  The multi-stage booster pumps in this group feature maximum suction (inlet) pressure: 75 PSI; maximum Liquid Temperature: 160∫ F (71∫ C); rotation is clockwise when viewed from motor end; maximum lift with foot valve: 10 ft., check NPSH curve.   The 60 Hz 3500 RPM motor is offered in both single phase (115/230 V) and three phase 208-230 (3HP 230V) or 208 ñ 230/460 V with NEMA standard 56J frame.  Open drip proof or totally enclosed fan cooled enclosures available as standard.  Single phase motors have built-in capacitor and overload with automatic reset.  The maximum suction (inlet) pressure is 75 PSI and the maximum liquid temperature is 160 ∞F (71 ∞C).  Note: For three phase motors, Class 20 overload protec¨tion must be provided in starter unit. Starter with over¨loads must be ordered separately.

 

 

SB ñ Available in Ω - l Ω  HP (60Hz)

Models:  5SB, 7SB, 10SB & 18SB

This 60Hz submersible pump is primarily used for general water supply for homes, farms, irrigation and some light commercial.  The submersible pumps in this group feature:

ï Abrasive Handling Construction: Impellers designed with flat wearing surface which provides effective sand handling capabilities.

ï Field Serviceable: Pump can be rebuilt in the field to like new condition with common tools and readily available spare parts. NOTE: The pump has left hand casing threads.

ï Powered for Continuous Operation: All ratings are within the working limits of the motor as recommend-ed by the motor manufacturer. Pump can be operated continuously without damage to the motor.

ï Metal Parts are Stainless Steel: AISI types 301 and 304 are corrosion resistant, non-toxic and non-leaching.

ï Non-Metallic Parts are FDA Compliant: Impellers, dif¨fusers and bearing spiders are constructed of a glass filled, corrosion resistant engineered composite.

ï Discharge Head: Engineered composite material for superior strength and corrosion resistance. Loops for safety line molded into head.

ï Motor Adapter: Engineered composite material with high rigidity to provide accurate alignment of liquid end to motor. Generous space for removal of motor mounting nuts with regular open-end wrench.

ï Bowls: Stainless steel for strength and abrasive resis¨tance.

ï Check Valve: Screws into discharge head from the top, easily removed for drain-back systems or replacement without disassembling the pump. Spring loaded, o-ring poppet design for positive seal in all conditions.

ï Stainless Steel Casing: Polished stainless steel is strong, attractive and corrosion resistant.

ï Hex Shaft Design: Six sided shaft for positive impeller drive.

ï Inlet Strainer: Molded suction strainer built into motor adapter.

ï Engineered Polymer Bearings: The proprietary, engi¨neered polymer bearing material is extremely strong and highly resistant to abrasion and wear. The en¨closed design upper bearing is mounted in a durable Noryl bearing spider for excellent abrasion resistance.

 

The NEMA motor features: Corrosion resistant stainless steel construction; Built-in surge arrestor is provided on single phase motors; Stainless steel splined shaft; Hermetically sealed windings; Replaceable motor lead assembly; NEMA mounting dimensions; Control box is required with 3-wire single-phase units and Three-phase motors require a starter with Class 10 overload protection.

 

L Series ñ Available in 3 ñ 50 HP range (60Hz)

Models:  50L, 65L, 95L, 120L, 160L, 250L, 320L

This 6î, stainless steel submersible pump is used for 6î and larger well.   These stainless steel submersible pumps are primarily designed for commercial, municipal and agricultural water needs such as municipal water supply, irrigation, fire booster, golf turf irrigation, mines and fish farming. 

 

WE ñ Available in 1/3 ñ 1 Ω HP (60 Hz)

Models:  3885

This 60Hz submersible effluent pump is specifically designed for on-site wastewater treatment for the following; homes, farms, trailer courts, motels, schools, hospitals, industry and effluent systems.   The submersible effluent pumps in this group feature solids handling capability of æî maximum, discharge size is 2î NPT and has capacities of up to 140 GPM, and total heads up to 128 feet TDH.  The motor features include:  fully submerged in high-grade turbine oil for lubri¨cation and efficient heat transfer; Class B insulation on 1/3 ñ 1Ω HP models and Class F insulation on 2 HP models.  The single phase 60 Hz motor features;  capacitor start motors for maximum starting torque, built-in overload with automatic reset, SJTOW or STOW severe duty oil and water resistant power cords, 1/3 ñ 1 HP models have NEMA three prong grounding plugs, 1Ω HP and larger units have bare lead cord ends.   The three phase 60 Hz motor features include: Class 10 overload protection must be provided in separately ordered starter unit; STOW power cords all have bare lead cord ends; designed for Continuous Operation pump ratings are within the motor manufacturer's recommended working limits and can be operated continuously with-out damage when fully submerged; Bearings: Upper and lower heavy duty ball bearing construction; Power Cable is severe duty rated, oil and water resis¨tant with epoxy seal on motor end which provides secondary moisture barrier in case of outer jacket damage and to prevent oil wicking (Standard cord is 20'. Option¨al lengths are available.); and O-ring, Assures positive sealing against contami¨nants and oil leakage.   Maximum temperature is 104 ∞F (40∞C) continuous and 140∞F (60∞C) intermittent.

 

WS Series Sewage Pumps

Models: 3886, 3886Z, 3886SP

This residential wastewater submersible sewage pump is primarily used for homes, sewage systems, dewatering effluent, water transfer systems.  The submersible sewage pumps in this group have a 2î maximum solids handling capability, discharge size of 2î NPT, and capacities up to 185 GPM.  Its total head is up to 38 feet TDH. Maximum temperature is 104 ∞F (40∞C) continuous and 140∞F (60∞C) intermittent.  The motors can be fully submerged in high grad turbine oil for lubrication and efficient heat transfer.  All ratings are within the working limits of the motor and it has Class B insulation.  The 60Hz single phase models feature capacitor start motors for maximum starting torque, built-in overload with automatic resent.  SJTOW or STOW severe duty oil and water resistant power cords and 1/3 ñ 1 HP models have NEMA three prong grounding plugs.    The three phase 60 Hz models have Class 10 overload protection must be provided in separately ordered starter unit; STOW power cords all have bare lead cord ends; designed for Continuous Operation pump ratings are within the motor manufacturer's recommended working limits and can be operated continuously with¨out damage when fully submerged; Bearings: Upper and lower heavy duty ball bearing construction; Power Cable is severe duty rated, oil and water resis¨tant with epoxy seal on motor end which provides secondary moisture barrier in case of outer jacket damage and to prevent oil wicking (Standard cord is 20'. Option¨al lengths are available.); and motor cover O-ring assures positive sealing against contami¨nants and oil leakage.  

 

WS BF Series Sewage Pumps ñ Available in 1/3 ñ 1 HP (60 Hz)

Models:  3887BF

This residential wastewater submersible sewage pump is primarily used for homes, water transfer, sewage systems, light industrial, dewatering/effluent and commercial applications.  The submersible sewage pumps in this group have solid handling capabilities up to 2î maximum. It has a discharge size of 2î NPT threaded companion flange standard with a 3î option available but must be ordered separately (Order no. A1-3).  Capacity is up to 185 GPM.  Maximum temperature is 104 ∞F (40∞C) continuous and 140∞F (60∞C) intermittent.  The motors can be fully submerged in high grad turbine oil for lubrication and efficient heat transfer.  All ratings are within the working limits of the motor and it has Class B insulation. The 60Hz single phase models feature capacitor start motors for maximum starting torque, built-in overload with automatic resent.  SJTOW or STOW severe duty oil and water resistant power cords and 1/3 ñ 1 HP models have NEMA three prong grounding plugs.    The three phase 60 Hz models have Class 10 overload protection must be provided in separately ordered starter unit; STOW power cords all have bare lead cord ends; designed for Continuous Operation pump ratings are within the motor manufacturer's recommended working limits and can be operated continuously with¨out damage when fully submerged; Bearings: Upper and lower heavy duty ball bearing construction; Power Cable is severe duty rated, oil and water resis¨tant with epoxy seal on motor end which provides secondary moisture barrier in case of outer jacket damage and to prevent oil wicking (Standard cord is 20'. Option¨al lengths are available.); and motor cover O-ring assures positive sealing against contami¨nants and oil leakage.

 

RGS ñ Available in 2HP (60 Hz)

Models:  GPGS, RGS2012, RGZ2012

This residential wastewater grinder pump and basin package is primarily used for high head sewage applications where a gravity system is not practical.  This pump features a 1 º ì NPT discharge with capacities to 41 GPM and total heads to 95í TDH. These grinder pumps also feature a single mechanical seal: silicon carbide rotary/silicon carbide stationary, 300 series stainless steel metal parts, BUNA-N elastomers. Another feature is a rotating cutter and cutter ring: 440 C stainless steel, hardened to 55 ñ 60 Rockwell C.  The motor is a single phase, 2HP, 60 Hz, 3450 RPM, 208/230V capacitor start with on winding thermal protector Class F insulation.  The Shaft is 300 series stainless steel threaded design.  There are ball bearings upper and lower and the power cord is 20 feet standard 14/3 STOW.  Maximum temperature is 104 ∞F (40∞C) continuous and 140∞F (60∞C) intermittent.

 

WS D3 Series Sewage Pumps ñ Available in 1.5 ñ 3 HP (60 Hz & 50 Hz)

Models:  3888D3 (60 Hz) and 3888ZD3 (50 Hz)

This residential wastewater submersible sewage pump is primarily used for flood and pollution control, dewatering effluent, farms, hospitals, trailer courts and motels.  It has a maximum sold size of 2.5î, a  3î discharge 125# ANSI flange, and maximum capacity 440 GPM.  The submersible sewage pumps in this group use 300 series stainless steel fasteners with a 20í Power cord and standard silicon carbide/silicon carbide outer seal.  The motor features a maximum ambient temperature is 104 ∞F (40∞C) continuous and 140∞F (60∞C) intermittent duty; is rated for continuous duty when fully submerged; insulation is Class F; 50 Hz; single row ball bearings and 300 Series stainless steel keyed shaft.  The single phase motor features 1.5 - 3 HP; 220 volts; built-in thermal overloads with automatic reset and built-in capacitors.  The three phase motor features; 1.5 - 3 HP; 200, 380 volts and Class 10 overload protection must be provided in control panel

 

 

WS D4 Series Sewage Pumps ñ Available in 1.5 ñ 5 HP (60 Hz & 50 Hz)

Models:  3888D4 (60Hz) and 3888ZD4 (50 Hz)

This residential wastewater submersible sewage pump is primarily used for flood and pollution control, dewatering effluent, farms, hospitals, trailer courts, and motels.  The submersible sewage pumps in this group have a maximum solid size of 3î; a 4î discharge 125# ANSI flange; maximum capacity 620 GPM; maximum total head of 60 feet; 300 Series stainless steel fasteners; 20í power cord and standard silicon carbide/silicon carbide outer seal.  The motor features a maximum ambient temperature is 104 ∞F (40∞C) continuous and 140∞F (60∞C) intermittent duty; rated for continuous duty when fully submerged, insulation Class F ; 60 Hz; single row ball bearings and 300 Series stainless steel keyed shaft.  The single phase motor features 1.5 - 5 HP; 208 and 230 volts; built-in thermal overloads with automatic reset and built-in capacitors.  The three phase motor features; 1.5 ñ 7.5 HP; 200, 230, 460 and 575 volts and Class 10 overload protection must be provided in control panel

 

3871 EP04 / EP05 Effluent Series Pumps ñ Available in 0.4 and 0.5 HP (60 Hz)

Models:  EP04 and EP05  

This submersible effluent pump is primarily used for effluent systems in homes, farms, heavy duty sump, water transfer and dewatering.  These submersible effluent pumps feature solids handling capability: æ" maximum; capacities: up to 60 GPM; total heads: up to 31 feet.; discharge size: 1Ω" NPT; mechanical seal is carbon-rotary/ceramic-stationary, BUNA-N elastomers; temperature: 104∫ F (40∫ C) continuous 140∫ F (60∫ C) intermittent; Class B Insulation; fasteners are 300 series stainless steel and is capable of running dry without damage to components.

The Motor features EP04 Single phase: 0.4 HP, 115 or 230 V, 60 Hz, 1550 RPM, built in overload with automatic reset;   EP05 Single phase: 0.5 HP, 115 V or 230V, 60 Hz, 1550 RPM, built in overload with automatic reset; Power cord is 10 foot standard length, 16/3 SJTW with three prong grounding plug. Optional 20 foot length, 16/3 SJTW with three prong grounding plug (standard on EP05) and fully submerged in high grade turbine oil for lubrication and efficient heat transfer. Available for automatic and manual operation. Automatic models include Mechanical Float Switch assembled and preset at the factory.

 

3872 WW Series Sewage Pump ñ Available in Ω HP (60 Hz)

Models:  3872

This residential wastewater submersible sewage pump is primarily used in residential sewage systems, dewatering, water transfer and anywhere waste or drainage must be disposed of quickly, quietly and efficiently.  The 3872 submersible sewage pumps feature: solids handling capability: 2" maximum; capacities: up to 75 GPM; total heads up to 18 feet; Discharge size: 2" NPT; Mechanical seal: carbon-rotary/ceramic-stationary, BUNA-N elastomers; Temperature: 104∫ F (40∫ C) continuous 140∫ F (60∫ C) intermittent; Class B Insulation; Fasteners: 300 series stainless steel; and capable of running dry without damage to components.  The motor features are a single phase: 1/2 HP, 115 or 230 V, 60 Hz, 1550 RPM, built in overload with automatic reset; power cord is 10 foot standard length, 16/3 SJTW with three prong grounding plug (Optional 20 foot length), 16/3 SJTW with three prong grounding plug; fully submerged in high grade turbine oil for lubri¨cation and efficient heat transfer. Available for automatic and manual operation. Automatic models include Mechanical Float Switch assembled and preset at the factory.

 

1DW  - Available in Ω - 1 Ω HP (60 Hz)

Model:  1DW

This submersible dewatering pump is primarily used for draining ditches and pits, industrial water drainage/transfer, handling dirty waters, water transfer, and excavating drainage in building trade.  These submersible dewatering pumps feature a discharge size of 1 1/2" NPT; capacities: up to 110 GPM; total heads up to 66 feet TDH; maximum solids: 3/8" spherical; mechanical seal: Silicon carbide rotary/silicon carbide stationary, 300 series stainless steel metal parts, BUNA-N elastomers; maximum submergence 23'; temperature limit: 120∫F (50∫C) maximum and fasteners: 300 series stainless steel.  Single phase:  60 Hz, 3500 RPM, 1/2 HP, 115 and 230 V; 3/4 and 1 HP, 230 V only.  Three phase: 60 Hz, 3500 RPM, 1/2 to 11/2 HP, 230 or 460 V.  Built-in thermal overload protection with automatic reset on single phase models.  Overload protection must be provided in starter unit with three phase pumps.  Power cord: 20 feet long. Single phase 115 V and 230 V models are supplied with molded NEMA plugs and built-in capacitors. Three phase models are supplied with bare leads.  Class F insulation

 

 

2DW ñ Available in Ω and 1 HP (60 Hz)

Model:  2DW

This submersible dewatering pump is primarily used for draining ditches, trenches, basements, manholes, excavating drainage in the building trades, and water removal from basements.  These submersible dewatering  pumps feature:  Discharge size is 2" NPSM threaded hose coupling design, can be rotated; Capacities: up to 84 GPM; Total heads: up to 51 feet; Maximum solids: any particles passing through strainer; Mechanical seals: outer seal ñ silicon carbide, inner seal ñ carbon ceramic; Temperature limit: 95∫F (35∫ C) maximum and Depth of immersion: 16.5 feet (5m) maximum.  The motor features are as follows:  Single phase: 3500 RPM, 1/2 HP and 1 HP, 115 and 230 V, 60 Hz; Built-in starter with full overload and temperature protection; Class F insulation; air filled design; upper and lower heavy duty ball bearing construction and power cord is  50 feet.

 

1DV/2DV ñ Available in Ω and 1 Ω  HP (60 Hz)

Models: 1DV, 2 DV

This submersible sewage pump is primarily used for dewatering applications in homes, farms, industrial treatment systems, mobile home parks and motels, municipal package systems, schools and hospitals.   These submersible sewage pumps feature a 1 Ωî discharge on the Ω HP and a 2î discharge on the æ HP and larger; solid size is 3/8" solids on 1/2 HP, 2" solids on 3/4 HP and larger; capacities to 130 U.S. GPM (41 m3/h); total heads: to 39 feet TDH (14 m); temperature: 104∫F (40∫C) continuous 140∫F (60∫C) intermittent; maximum submergence: to 17 feet (5 m); AISI 304 SS casing; AISI 304 SS impeller; and continuous duty rated, non-overloading motor.  The motor features are as follows:  Single phase: 60 Hz, 3450 RPM, 1/2 HP, 115 V; 1/2 to 1 HP, 230 V; Three phase: 60 Hz, 3450 RPM, 1/2 to 11/2 HP, 230 and 460 V; non-overloading; air-filled, class F insulated motor; thermal overload protection: built-in with automatic reset on single phase, 115 V and 230 V models; three phase models require external overload in panel; power cord is 20 feet long.; Single phase 115 V and 230 V models are supplied with molded NEMA plugs and built-in capacitors; Three phase models are supplied with bare leads; Float controls: optional, see accessory section for simplex or duplex system requirements and rotation is clockwise when viewed from top.

1DM/2DM ñ Available in Ω and 1 Ω  HP (60 Hz)

Models:  1DM, 2DM

This residential submersible sewage pump is primarily used for homes, farms, mobile home parks and motels, schools and hospitals, municipal package systems, industrial treatment systems and dewatering applications.  These submersible sewage pumps feature:  11/2" discharge on 1/2 HP; 2" discharge on 3/4 HP and larger; solid size: 13/8" solids on 1/2 HP; 2" solids on 3/4 HP and larger; capacities: to 175 U.S. GPM (41 m3/h); total heads: to 47 feet TDH (14 m); temperature: 104∫F (40∫C) continuous 140∫F (60∫C) intermittent; maximum submergence: to 17 feet (5 m); AISI 304 SS casing; AISI 304 SS impeller; and continuous duty rated, non-overloading motor.  The motor features are:  Single phase: 60 Hz, 3450 RPM, 1/2 HP, 115 V; 1/2 to 1 HP, 230 V; Three phase: 60 Hz, 3450 RPM, 1/2 to 11/2 HP, 230 and 460 V; non-overloading; air-filled, class F insulated motor; thermal overload protection: built-in with automatic reset on single phase, 115 V and 230 V models; Three phase models require external overload in panel; power cord is 20 feet long; Single phase 115 V and 230 V models are supplied with molded NEMA plugs and built-in capacitors; Three phase models are supplied with bare leads; float controls: optional, see accessory section for simplex or duplex system requirements and rotation is clockwise when viewed from top.

 

1 SC ñ Available in Ω , æ, and 1 HP (60 Hz)

Models:  1SC

This bottom suction drainage booster pump is primarily used for pumping water out of reservoirs and storage tanks for delivery to homes, farms, mobile home parks, motels, schools hospitals, as well as servicing s number of municipal, industrial and commercial applications.  These drainage booster pumps feature a 1 º ì NPT discharge and open suction; Maximum suspended solids 1/8"; capacities: to 35 U.S. GPM (7.9 m3/h); total heads: to 240 feet TDH (70 m); temperature: 104∫F (40∫C) continuous 140∫F (60∫C) intermittent; maximum submergence: to 65 feet (20 m); and continuous duty rated, non-overloading motor.  The motor features are:  Single phase: 3450 RPM, 115 and 230 V, 60 Hz; Three phase: 3450 RPM, 230 V and 460 V, 60 Hz; non-overloading; Class F insulation; c CSA US listed, three phase only; thermal overload protection: built-in with automatic reset on single phase; Three phase models require external overloads in panel; power cord: All 30' long ; Single phase ñ 16/3, with 115 V or 230 V plug; and Three phase ñ 16/4 STO, bare leads.  NOTE: See accessory section for separate control panels. *100' cords available by adding "J" suffix in place of "A" on end of part number.

PE ñ Available in .33, .40, and .50 HP (60 Hz)

Models:  PE

This residential wastewater submersible effluent pump is primarily used for on-site wastewater treatment; mound systems, effluent/dosing systems, low pressure pipe systems, basement draining, and heavy duty sump/dewatering.  These submersible effluent pumps feature discharge: 11/2" NPT ; temperature: 104∫F (40∫C) maximum, continuous when fully submerged;  solids handling: 1/2" maximum sphere.; automatic models include a float switch; and manual models are available. For pumping range see performance chart or curve. 

PE31 Pump: Maximum capacity: 53 GPM; Maximum head: 25í TDH

PE41 Pump: Maximum capacity: 61 GPM; Maximum head: 29' TDH

PE51 Pump: Maximum capacity: 70 GPM; Maximum head: 37' TDH

 

The motor features are as follows: Single phase; 60 Hertz; 115 and 230 volts; built-in thermal overload protection with automatic reset; Class B insulation; Oil-filled design and High strength carbon steel shaft.

PE31 Motor: .33 HP, 3000 RPM; 115 volts; Shaded pole design

PE41 Motor: .40 HP, 3400 RPM; 115 and 230 volts; PSC design

PE51 Motor: .50 HP, 3400 RPM; 115 and 230 volts; PSC design

 

PS ñ Available in .40 and .50 (60 Hz)

Models:  PS4, PS5

This residential wastewater submersible sewage pump is primarily used for residential sewage systems, heavy duty sump/dewatering and water transfer.  These submersible sewage pumps feature a 2î NPT discharge; Maximum temperature is 104 ∞F (40∞C) continuous when fully submerged; solids handling 2" maximum sphere; automatic models include a float switch; Manual models available.

PS4 Pump: Maximum capacity: 110 GPM; Maximum head: 23í TDH

PS5 Pump: Maximum capacity: 130 GPM; Maximum head: 27í TDH

 

The motor features are as follows:  Single phase; 60 Hertz; 115 and 230 volt; built-in thermal overload pro-tection with automatic reset; Class B insulation; oil-filled design and high strength carbon steel shaft

PS4 Motor: .40 HP, 3400 RPM; PSC design

PS5 Motor: .50 HP, 3400 RPM; PSC design

 

ST51/ST71 ñ Available in .50 and .75 (60 Hz)

Models:  ST51, ST71

This submersible sump pump / effluent pump are primarily used for basement draining, dewatering, water transfer and effluent transfer.  These submersible sump pumps / effluent pumps feature a 1 Ω NPT discharge; temperature: 104∫F (40∫C) maximum, continuous when fully submerged; solids handling: 1/2" maximum sphere; automatic models include a float switch; for pumping range: see performance chart or curve.

ST51 Pump: Maximum capacity: 61 GPM; Maximum head: 29' TDH

ST71 Pump: Maximum capacity: 70 GPM; Maximum head: 37' TDH

 

The motor features are as follows:  Single phase; 60 Hertz; 115 volts; built-in thermal overload protection with automatic reset.; Class B insulation; oil-filled design; and high strength carbon steel shaft

ST51 Motor: .50 HP, 3400 RPM; 115 volts; PSC design

ST71 Motor: .75 HP, 3400 RPM; 115 volts; PSC design

 

 

STS21/STS31 ñ Available in º and 1/3 HP (60 Hz)

Models:  STS21 and STS31

This submersible sump pump is primarily designed for basement draining, dewatering, water transfer and filtered effluent.  These submersible sump pumps feature 1 Ω ì NPT discharge with capacities to 38 GPM; maximum head: 25 feet TDH; maximum solids: 3/16" spherical; temperature: 104∫ F (40∫ C) maximum liquid temperature and Mechanical seal: ceramic/silicon carbide faces with BUNA elastomers. The motor features are as follows:  Single phase, 3450 RPM, 60 Hz; STS21, º HP, 115 V, 2.5 amps; STS31, 1/3 HP, 115 V, 4.5 amps; built-in thermal overload protection with automatic reset; permanent-split-capacitor type; Class B insulation; air filled design and power cord length: 20 feet with NEMA 5-15P plug.

 

 

 

Tanks ñ Hydro ProÆ

Models:  V6P ñ V350 Series, TP and T Series

The HydroProÆ tanks are designed for home, cottage and farm use.  HydroPro tanks feature a heavy-duty butyl diaphragm, rigid polypropylene liner, all stainless steel system connection, and heavy-duty polypropylene base eliminates corrosion

 

Aquavar ABII Pump Controller

Models:  1AB2, 2AB2, 3AB2, 5AB2

The Aquavar ABII pump controller is a pre-packaged system that includes: pump motor, pressure tank*, pressure transducer, piping tee, pressure gauge, wiring with flexible conduit. This system is primarily used in low water pressure applications, domestic and light commercial applications, homes with multiple baths and irrigation.

 

These controllers include:  single phase input voltage ONLY, 208 ñ 230 volt; ±15% tolerance (115 volt option available on 1 HP, 1AB2); maximum amperage on motor is 16.6 Amps with 5; HP controller; motor must be three phase; 208 ñ 230 volt, ±10%; flows up to 110 GPM, with 5 HP pump; pressure factory set for 50 psi; field programmable pressure setting up to 80 psi; total system; outdoor rated, NEMA 3R enclosure, rain-tight;UL, CUL, CE approvals; FCC compliant for interference; signal lights for pump running, faults, stopped; self-diagnostic, plug-in display not needed; field setting for booster pumps; Wall mounted with convection air cooling; maximum ambient temperature 104∫ F; electrical efficiency above 95%; simple and quick installation. Sold as stand alone unit or with packaged system. *Tee not available on all package systems.

 

Aquavar Solo

Models:  1AS15, 3AS20, 3AS30, 3AS50

The Aquavar Solo is a variable speed, constant pressure pump controller primarily used for submersible well pumps. The controller monitors pressure and adjusts pump speed to maintain a constant pressure.  Retrofit a conventional system into a premium constant pressure system using the Aquavar Solo controller.

 

These controllers include:  single phase input voltage 208-240 Volt; single phase output available for Ω - 2 HP

pump motor; three phase output available for æ - 5 HP motors; reduces motor cable wire size; more room for easy cable/wire connections;  larger wiring terminals; outdoor rated painted steel enclosure,  NEMA 3R; Ambient temperatures up to 122∫ F; Built-in power surge protection; auto cooling fan with filter; easy to adjust pressure control pushbuttons; provides motor protection on long motor leads; flashing LED for troubleshooting and

status; includes pressure sensor and shielded cable; 2-year standard warranty; adjustable current overload protection to match motor Service Factor SFA; the Aquavar Solo controllers and GS stainless steel submersible pumps are now available in convenient ProPak kits.

 

ProPak Kits

Models:  ProPak

The ProPak kits are primarily used in private homes and for irrigation purposes.  The specifications would come from the GS and Solo.  The kit includes:  CentriPro Three Phase Motor 1.5 ñ 5 HP, 230 V; CentriPro Aquavar SOLO pump controller with Transducer; Goulds Water Technology Pumps GS Water End (pump).  Available in 30 ñ 60 Hz pump motor kits (Note: ProPak kits do not include pressure tanks.  Tanks must be ordered separately.)

 

Aquarvar SPD

Models:  SPD

The Aquavar SPD variable speed single pump drive is primarily used for water pumps serving commercial buildings, pressure boosting for light industry, wash systems, filtration, rural water and municipal systems and groundwater/irrigation.  This variable speed single pump controller features include:  Easy Set-up Pre-set for submersible or surface motor characteristics. No complicated menus or programming, total set up time is less than 30 minutes; With Filter for Submersible applications with long wire runs; Without Filter for Surface Mount Systems with short wire runs; NEMA 3R Outdoor rated enclosure. Operating temperature -22∫ F to 122∫ F!; Dual Phase Input, the same drive can be used for either three phase or single phase input (de-rated); Filter Pack available with output filter rated to 1000 feet of motor lead. Programming is pre-set to 30 Hz minimum speed; True Motor Match Rated for the higher amps typical of higher HP submersible pumps; Transducer 0ñ 300 PSI pressure transducer is included with the drive. It is pre-wired and tested; Full Diagnostics Full range of pump protection features such as bound pump or motor shut down, low water or loss of prime shut down; Remote on/off permits external control by timers (irrigation), float or pressure switches (tank draining) or manual control. Dry contact closure required; Hand/Auto Option allows the drive to be run at full speed without a pressure transducer for longer periods of time as in the case of new well

development or system start up; Remote Monitoring External monitors may be connected to the drive for monitoring pump running speed (4-20 mA output based on speed); pump on, and system fault. The 4-20 mA output can be utilized for functions such as an external dosing system, chlorine injection and auto dialer fault

indication; Pressure Drop The reaction time of the drive to pressure drops can be adjusted from the

typical 5 PSI drop to as much as 20 PSI; Dual Set Point May be programmed with two pressure set points. An external contact such as a timer can be used to change between them; and No Water Restart The time delay between ìdry wellî faults is adjustable from 10 minutes to 2 hours.

 

3642/3742

Model 3642, 3742

The 3642/3742 cast iron pump or bronze pump is primarily used for water circulation, booster service, liquid transfer, spraying systems, jockey pump service and general purpose pumping.  These cast iron pumps or bronze pumps feature pipe connections 1 ºî NPT suction/1: NPT discharge and 1 Ωî suction and 1 ºî discharge.  This close-coupled and frame mounted centrifugal pumps have a maximum working pressure of 125PSI, Temperature: standard seal 212∞F (100 ∞C) maximum or 250∞F (121 ∞C) with optional high temperature seal.  Available in single phase (1/2 -2 HP ODP or TEFC built in overload with automatic reset and three phase 1/3 ñ 2 HP ODP, 208-230/460 V Ω - 2 HP:  TEFC, 208-230/460 V Ω - 2 HP: expl. Proof, 230/460V.  NEMA 56J frame motors are used on close-coupled 3642 pumps and T-frame motors are used on frame-mounted 3742 pumps.  Overload protection must be provided in starter unit.  Starter and heaters (3) must be ordered separately. This pump can come in 3 configurations: all bronze pump, all cast iron pump and bronze fitted pump.

 

 

MCC END SUCTION CENTRIFUGAL PUMPS

Models:  1MC, 2MC, 3MC

These cast iron pumps with 316 stainless steel impellers are primarily used in a broad range of general applications; water circulation, booster service, liquid transfer, spray system, chillers, washing/cleaning systems, injection molding cooling, air scrubbers, heat exchangers, filtration systems, jockey pumps, OEM applications and general water services.   This cast iron pump has capacities to 220 GPM (56.8 m3/hr) at 3500 RPM with heads to 142 feet (43 m).  This end suction centrifugal pump has working pressures to 75 PSIG (5 bars) 125 PSIG (9 bars) optional seals.  Maximum temperatures are 212∞F (100∞C) with standard seal or 250∞F (121∞C) with optional high temperature seal.  The Motor specifications:  NEMA 48 or 56 square flange frame. 3500 RPM Ω through 5 HP. Open drip-proof, Ω -3 HP totally enclosed fan-cooled enclosures. It also comes with a stainless steel shaft with ball bearings. Single phase: Voltage 115/230 ODP and TEFC. (3 HP model ñ 230 V only) Built-in overload with auto-reset provided.  Three phase: Voltage 208-230/460 ODP and TEFC.  NOTE: For three phase mo-tors, overload protection must be provided in starter unit. Starter and heaters must be ordered separately.

 

LC

Model: LC

The model LC is a multi-stage centrifugal pump that primarily is used for water circulation, booster services, liquid transfer, spraying systems, general purpose pumping, and jockey pump service.  These multi-stage centrifugal pumps have capacities to 95 GPM (21.5 m3/hr) with pipe connections; LCA 1 x 1º NPT, LCB 1 x 1º NPT, LCC 1 x 1Ω NPT  and maximum working pressure to 125 PSI (8 bar).  The motors are as follows:  2 HP single phase 230/115 V, 60 Hz, ODP; 3 HP and 5 HP single phase 230 V, 60 Hz, ODP; 2 HP and 3 HP single phase 208ñ230 V, 50/60 Hz, TEFC; 2 HP, 3 HP and 5 HP three phase 208ñ230/460 V, 50/60 Hz, ODP (5 HP is 60 Hz only); 2 HP, 3 HP 208ñ230/460 V, 50/60 Hz, TEFC.  All motors are 56Y or 48Y frame square flange. NOTE: For three phase mo¨tors and 5 HP single phase, overload protection must be provided in starter unit. Starter and heaters must be ordered separately.

 

3656SP now Primeline SP

Models:  PrimeLineSP, SPM & SPH Series

These self-priming centrifugal pumps are primarily used for lawn irrigation, dewatering, liquid transfer, plot irrigation and livestock watering.   This self-priming centrifugal pump features flows to 240 GPM; heads to 165 feet, reprime capabilities to 25',  2" through 3" suction, 1Ω" through 2Ω" discharge, and maximum temperature 160∫F .  The motor features are: NEMA standard, JM shaft, Open Drip Proof or Totally Enclosed Fan Cooled; Single phase: 3 HP, 115/230 V; 5 HP, 230 V; Three phase: 3 and 5 HP, 208-230/460 V or 575 V.  Note: Pump is not rated for 50 Hz service.

 

3656/3756 S Group

Models:  3656 S Group, 3756 S Group

This residential and commercial bronze fitted, cast iron centrifugal pump primarily is used for booster service, spraying systems, irrigation, water circulation, liquid transfer and general purpose pumping.   These bronze fitted cast iron centrifugal pumps feature: Capacities to 550 GPM (125 m3/hr) at 3500 RPM, 350 GPM (79 m3/hr) at 1750 RPM; Heads to 280 feet TDH (85 m) at 3500 RPM, 67 feet TDH (20 m) at1750 RPM; Working pressure to 175 PSIG (12 bars); Suction pressure to 100 PSIG (7 bars) and Maximum temperature to 212∞F (100∞C) with standard seal or 250∞F (121∞C) with optional seal.  This pump can come in 3 configurations: all bronze pump, all cast iron pump and bronze fitted pump.

The motor features: NEMA standard JM frame or JP frame for 3656 or T-frame for 3756. Open drip-proof, totally enclosed fan cooled and explosion proof enclo¨sures available; Single phase (115/208 ñ 230 V), Ω to 3 HP (208 ñ 230 V) 5 HP and (230V only) on 7Ω, 10 HP; Three phase (208 ñ 230/460 V) standard note that 20 and 25 HP are (230/460 V).  Direction of Rotation:  Clockwise viewed from motor end.

 

3656 / 3756 M/L Group

Models:  3656 M/L Group, 3756 M/L Group

This cast iron, bronze fitted, end suction pump is primarily used for booster service, spraying systems, irrigation, water circulation, liquid transfer, and general purpose pumping.  These end suction pumps feature capacities to: 1600 GPM (363 m3/hr) at 3500 RPM, 4500 GPM (1020 m3/hr) at 1750 RPM; heads to 490 feet TDH (150 m) at 3500 RPM, 300 feet TDH (90 m) at1750 RPM; working pressure to 200 PSIG (14 bars) and Suction pressure to 100 PSIG (7 bars).  This pump can come in 3 configurations: all bronze pump, all cast iron pump and bronze fitted pump.

Maximum temperature to: 212∞F (100∞C) with standard seal or 250∞F (121∞C) with optional seal.  The motors features are as follows: NEMA standard JM frame for 3656 or T-frame for 3756 mechanical seal, JP or T-frame for packed box. Open drip proof, totally enclosed fan cooled and explosion proof enclosures available. Single phase (115/230 V), 2-5 HP and three phase (208 ñ 230/460 V) 2 ñ 150 HP are available at 1750 or 3500 RPM. Direction of Rotation:  Clockwise viewed from motor end.Type your paragraph here.